Sinkhole Investigation and Grouting: Novel Recommendations for a Pipeline Right-of-Way
In 2009, numerous sinkholes developed within and adjacent to a 400-ft-long section of high-pressure, petroleum pipeline right-of-way that crosses under a local creek in Plymouth Meeting,...
Evaluation of the KeySystem II Retaining Wall
By Keystone Retaining Wall Systems, Inc. with TenCate Geosynthetics Geogrid Reinforcement
Prepared by the Highway Innovative Technology Evaluation Center (HITEC). This report describes a HITEC evaluation designed to determine the basic capabilities...
Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE 5-11), and Specification for Masonry Structures TMS 402-11/ACI 530-11/ASCE 6-11), and Companion Commentaries
Building Code Requirements and Specification for Masonry Structures contains two standards and their commentaries: Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE...
Journal of Pipeline Systems Engineering and Practice
The Journal of Pipeline Systems Engineering and Practice is a professional, authoritative technical resource that reports on a broad range of topics pertaining to the planning, engineering, design, construction,...
Minimum Design Loads for Buildings and Other Structures
Performance-Based Design Method (PBDM)
This chapter discusses the performance-based design method (PBDM). Topics include performance objectives; recommended analysis methods; modeling guidance; preliminary proportioning; acceptance...
Effects of Impervious Area Estimation Methods on Simulated Peak Discharges
The variability of simulated flood discharges is evaluated using two methods for estimating impervious surfaces and common design methods in the Mission Creek watershed (31 sq km) located...
Innovative Methods Used in the Design and Construction of the New Tacoma Narrows Bridge
On September 25, 2002, Notice-to-Proceed for a Design/Build Agreement was issued by the Washington State Department of Transportation (WSDOT), directing Tacoma Narrows Constructors (TNC)...
Current Programs in American Post-Secondary Wood Design Education
Wood engineering has been a requirement in civil/structural engineering education curricula forcenturies. In 1990, a comprehensive survey was conducted of wood engineering educationprograms...
The Role of Aesthetics in Bridge Design
The role of aesthetics in current bridge design practice varies widely. Many bridgeprojects in the United States are developed without including aesthetics as one of theproject goals....
Structures Congress 2008
Crossing Borders
The 40th Structures Congress's technical program consists of 10 tracks and three poster sessions. The program covers practical design in the following topic areas including...
2008 Civil Engineering Industry Buyer' Guide
A Special Supplement to Civil Engineering Magazine
This guide covers the following topics: Construction materials; Geotechnical and environmental; Information technology; Pipelines, sewers, and accessories; Professional and professional...
Evaluation of Geopier Rammed Aggregate Piers by Geopier Foundation Company
Final Report
Prepared by the Highway Innovative Technology Evaluation Center (HITEC). This report describes a HITEC evaluation designed to determine the basic capabilities...
Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-08/ACI 530-08/ASCE 5-08, Specification for Masonry Structures (TMS 602-08/ACI 530.1-08/ASCE 6-08) and Companion Committees
The Code covers the design and construction of masonry structrures while the Specification is concerned with the minimum construction requirements for masonry in structures. Some of the...
Design-Build Contract Complexities
There are many approaches or options that an owner may pursue in acquiring facilities. Depending on the owner's objectives, the DB project approach may offer unique benefits,...
Project Definition and Conceptual Design
In order to select a DB contractor, the owner must define its requirements for project implementation and for the completed project. These requirements are typically incorporated into...
General Terms and Conditions
DB commercial contract terms can differ from conventional design-bid-build project terms, depending primarily on the owner's objectives, the level of risk that is to be assigned...
Specifications for Design-Build Projects
This chapter discusses the various specifications that come with a design-build project, including owner-generated specifications and contractor-generated specifications....
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Two
Prepared by the Program Committee, Offshore Technology Conference, of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Structures Congress 2007
The Congress' technical program was designed with the practicing structural engineer in mind while maintaining a rigorous standard for the academic presentations. Topics include:...
Return to search